background image

128-6802

10 OF 12

ADDITIONAL REMOTE FUNCTION ( CHANNEL 4 )
This security system has an additional feature that can be connected to a number
of different optional accessories. Some of the more common uses for this channel
are:

o

 Remote Trunk Release

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

To activate the optional accessory, press the programmed button on the keychain
transmitter for up to 8 seconds for continuous output, or press and release for
momentary activation. The optional accessory will immediately engage.  Check
with your installation center for more information on the optional accessory that
may have been installed and how it is accessed.

ADDITIONAL REMOTE FUNCTION ( CHANNEL 5 )
This security system has an additional feature that can be connected to a number
of different optional accessories. Some of the more common uses for this channel
are;

o

 Remote Trunk Release

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

To activate the optional accessory, press the programmed button on the keychain
transmitter for up to 8 seconds for continuous output, or press and release for
momentary activation. The optional accessory will immediately engage.  Check
with your installation center for more information on the optional accessory that
may have been installed and how it is accessed.

IGNITION CONTROLLED LOCK UNLOCK: (Unlock Drivers Only, or Unlock All Doors)
Your security system has a selectable safety feature that allows the vehicle doors
to lock when the ignition switch is turned on, (Providing all doors are closed), and
to unlock the doors when the ignition switch is turned off.  In addition, the unlocking
of the doors is further selectable,  in a two step unlock configuration, to unlock only
the drivers door or all doors.

TELEMATIC UPGRADE:
This system has the ability to have a telematic upgrade module connected to it.
This is a upgrade that can give you control of certain functions of your vehicle from
a Telephone, or in some cases a computer  interface.  Please check with your
installation center for most recent Telematic Upgrades.  If you had a Telematic
Upgrade installed, the manual supplied with the upgrade unit will provide a opera-
tors manual advising of the features of the system and means available to control
these features of your vehicle.

FLASHLIGHT TRANSMITTER:   
One or more of the transmitters packaged with your system has a flashlight built
into the unit which when the flashlight icon button is pressed will cause the trans-
mitter light to turn on.  This is a strong LED type light and should not be pointed
directly into the eyes.

Page  10

Summary of Contents for Prestige Platinum+ APS-511C













Reviews: