Audiovox MVX-480 Series, User Manual, Page: 15 / 50

To program your PIN
1.
Enter your three digit security code.
2. Press the key, then .
3. The word “OFF” will appear in the display.
4. Enter your 4 digit PIN.
5. Press the key to turn your PIN feature on.
To turn the ANTI FRAUD feature on / off and change PIN Number.
1.
Enter your three digit security code.
2. Press the , then .
3. Your PIN number and the “ON/OFF” status will appear in the display.
or
4. Press the key to turn the PIN entry feature on or off.
5. If necessary, enter the new PIN Number.
6. After you have entered the desired on or off status or new PIN Number, press the key then the key.
To place a call with the PIN entry feature in Voice Mail dialing (See “Voice MAIL DIALING” for more details)
1. Press the key for more than 0.5 seconds. The last 10 digits of the number in memory address 41 will appear
in the display. As your call is being processed, the word “SEND PIN” will appear in the display.
2. Press the key again, your call will then be sent digitally to the cell site. After you hear the signal from the
Operating Office, press “Voice Mail Access” key again. The second number in memory address 42 is sent
with DTMF tones. You will monitor the tones through the loudspeaker. The third through fifth number in memory
address 43 through 45 can be accessed sequentially in the same manner as above.
To Place a Call with a Number in the Memory
1. Press , then enter the memory address (01 through 30). The last 10 digits of the number will appear on the
readout. If the number is longer than 10 digits, press , then enter the first digit of the memory address, then
hold down the second digit of the memory address.
2. Press . The indicator will light as the call is placed.