Audiovox MVX-480 Series, User Manual, Page: 14 / 50

2. When you receive a call, a single beep and a flashing “CALL” message on the display will alert you.
3. Press to answer the call. “CALL” on the readout will go out.
4. This mode is deactivated by pressing , then . “S-ALT OFF” will be displayed for 5 seconds.
5. If the Silent Incoming Calls is activated when the unit is powered up “S-ALT ON” will appear on the readout for 5
seconds.
Any Digit Key Answering
This feature permits you to answer on incoming call by pressing any of the digit keys on the key pad.
Automatic Answering
With this feature on, incoming calls will be automatically answered after two alert tones, and the “ ” indicator will
light on the readout. Then the unit is ready for conversation.
1. To activate this mode, press and then key . “A-ANS ON” will appear on the readout.
2. This mode is deactivated when and then key are pressed again. “A-ANS OFF” will be displayed for 5
seconds.
3. This feature will not function if the unit is in the Lock or Silent Incoming Call Mode. If the Automatic Answering is
activated when the unit is powered up, “A-ANS ON” will appear on the readout for 5 seconds.
Anti Fraud Security Features
Your new Audiovox Cellular telephone has been engineered with the latest technology to help protect from the fraudulent
use of your cellular telephone number. You phone is equipped with Authentication and PIN (Personal Identification
Number) Dialing. (Availability of these features depends on your Service Provider). Should your Service Provider
require use of a PIN, your PIN can be sent manually or programmed into the phone for more convenient use. Cellular
fraud most often occurs by cellular thieves using electronic devices that can read your unique cellular phone number and
your phone’s electronic serial number (E.S.N.). This information can then be programmed into another phone for
fraudulent use. Certain cellular systems provide for an ANTI-FRAUD security feature to help protect the unauthorized
use of your cellular telephone number. This feature utilizes a special personal identification number (PIN). Should your
new cellular carrier offer this enhanced service, your new phone must be programmed with a PIN chosen by you. For
your protection, you cannot make any outgoing calls until you have established your PIN. To establish your PIN, please
contact your cellular service provider for specific instructions.
To place a call using PIN security feature
1.
Enter the umber you are calling by either dialing the number or recalling the number from a specific memory
location.
2. Press the key as your call is being processed the word “SEND PIN” will appear on the display.
3. Press the key again, your call will then be placed.