Audiovox MVX-480 Series, User Manual, Page: 13 / 50

To Recall from Memory with Name
Recalling from the repertory memory with name is identical to standard repertory recall. When the number is recalled, the
display will show the Alpha Name Tag as well as the stored number.
PLACING TELEPHONE CALLS
To Place a Call
1.
Enter the phone number.
2. The last 10 digits of the dialed number are displayed on the readout.
3. Press . The indicator will light.
Note: If dialing error is made, press , then enter the phone number again. Pressing momentarily (Approxi-
mately less than 0.5 sec.) clears the last digit only.
If the Call Fails to Go Through
·
If you hear the “reorder” signal, press , then if there were no dialing errors, press for redial.
(Redialing with digit keys is not necessary.)
·
If the “intercept” signal is heard, press then redial the correct number.
Automatic Redial (Programmable Option)
If the feature of Automatic Redial (Programmable Option) is selected, your unit will automatically make seven attempts
to reach the cell site when the first try is not successful.
The
indicator will stay on, but the speaker will be muted for thirty seconds. This is done so that you do not hear
the reorder signals out of the speaker. If you need to terminate the automatic redial, press .
Terminating a Call
Press and the indicator will go out.
To Receive Calls
1. When the telephone rings, press to answer the call. The indicator will light.
Silent Incoming Calls
If Silent Alert feature is set, a single beep and a flashing “CALL” message on the display will alert you of an incoming
call. Once you have switched to silent alert, the phone stays in that mode until you deactivate it
1. Press , then . The “S-ALT ON” will appear in the display.