VEHICLE INSTALLATION
To install the unit to the back seat of a car:
1. Raise the headrest to get access to the headrest posts.
2. Clamp front bracket (A) and rear bracket (B) around the headrest posts.
3. Insert the four screws (C) and evenly tighten the screws.
4.
Install the unit on to the three hooks (E) on the mounting plate (F).
5.
Slide the quick disconnect bracket (D) and DVD player into the rear bracket (B). Make sure it
is locked into the bracket.
6. Secure the swivel LCD screen in place using the movable hook (G).
7. Rotate the unit to the desired viewing position and tighten the knob.
To remove the unit:
1. Press the buttons on both sides of the quick disconnect bracket (D).
2. At the same time, pull the quick disconnect bracket (D) out of the rear bracket (B).
7
A
C
D
B
F
G
E
E
