18
Note
·
Leave the input selection function by holding down the
set
key
longer than 2 seconds.
·
Using the Audionet System Remote Control
Harmony One
, select an
input channel by simply pressing the corresponding key (see section
'
Screen 1
' on page 28), or use the keys
Ch+
and
Ch-
to switch to
the next or previous input channel without using the
Select Input
function.
6.9 Muting
Note
·
The mute function is only available on the Audionet System Remote
Control
Harmony One
.
Press key
on the Audionet System Remote Control
Harmony One
to
mute or un-mute your SAM G2.
Just as well as the input selection, the SAM G2 uses 'soft' muting, i.e.
volume is stepped down gently to -80 dB. The display informs the user of
a muted unit with the text
MUTE
. Even if the brightness level is set to
Off
, the text is displayed (see section '
Set Display Brightness
' on page
21).
To un-mute the SAM G2 press key
again. Here as well, the volume is
stepped up gently to its original level after switching on the outputs.
Note
·
While the unit is muted, you may of course select a different input
channel as described above. But the SAM G2 will stay muted until you
press the key
again to un-mute and restore the original volume
level.
·
If you turn up the volume by using the key
up
or
Vol+
, while the
SAM G2 is muted, the muting function will be deactivated and the new
volume level set.
