16
·
If you switch off your Audionet chain using Audionet Link, it is im-
portant to wait until
all
devices are shut down before you restart the
system.
6.5 Control elements on the front panel
The front panel has four keys to control the SAM G2 (see section
'
Overview front panel
' on page 7). With these keys you can control all
functions as well as all setup options to adjust the unit to your preferences
(see section '
Setup menu
' on page 19).
power
Use key to switch on/off the unit (see section '
Switching
on and off
' on page 14).
set
Push key shortly to navigate through the setup menu.
Keep key pushed for longer than two seconds to exit the
setup menu (see section '
Setup menu
' on page 19).
down
Push key to reduce volume, select previous input chan-
nel (see section '
Input selection
' on page 17) or change
an option of the setup menu (see section '
Setup menu
'
on page 19).
up
Push key to increase volume, select next input channel
(see section '
Input selection
' on page 17) or change an
option of the setup menu (see section '
Setup menu
' on
page 19).
6.6 Volume control
While the SAM G2 is in normal operating mode use keys
up
and
down
on the front panel to adjust the volume.
up
increases,
down
decreases the
volume.
The volume control of the SAM G2 runs in a range from –80 dB to +0 dB
relatively to the level of the input signal.
Note
·
Use keys
up
and
down
also to change an option from the setup menu
(see section '
Setup menu
' on page 19) as well as to select an input
channel (see section '
Input selection
' on page 17).
