28
5 INPUT FIVE
LEVEL –46+3dB
SET DC SERVO:
In 3 : disabled
7.6 Offset Adjust
Push the
set
key six times for less than two seconds to get to the offset
adjustment menu.
Use the
up
key on the front panel to increase the level of the currently
selected input channel. If you would like to decrease the offset level, use
the
down
key. The display informs you of your selection:
For each of the six input channels and for the monitor loop of the
PRE1 G3 you can define the adjustment of the input level in the range of
–9 dB to +9 dB in steps of 1 dB to match the different output levels of
sources connected to the PRE1 G3.
Tip
·
To adjust the offset of the monitor loop you first have to activate the
loop (see section '
Set Monitor
' on page 23). Now you adjust the offset
as described above for the offset of the input channels.
·
If you would like to adjust the input level offset for just another input
channel, please use the keys
Ch+
and
Ch-
of the Audionet Sys-
tem Remote Control to switch to the desired channel. The PRE1 G3
does
not
leave the setup menu, and you are able to adjust the offset
for each input channel very easily.
7.7 Set DC Servo
Push the
set
key on the front panel seven times for less than two seconds
to adjust the DC Servo option.
Push the
up
key to activate the DC Servo for the currently selected input
channel. To disable the DC Servo push the
down
key.
offset adjustment in dB
currently selected input channel
status DC Servo
Summary of Contents for PREI G3
Page 1: ...1 Stereo Pre Amplifier User s Manual ...
Page 2: ...2 ...
