16
6.3 Mains phase detection
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord that the 'hot' pin of the wall
outlet is connected to the pin marked '
phase
' 21 of the mains input 22
on the back panel. The PRE1 G3 recognizes the incorrect polarization of
the mains plug automatically. Right after switching on the unit from
stand-by mode by pressing the
power
key on the front panel the follow-
ing message will appear in the display in case the mains polarization is
incorrect:
Attention: Mains
Phase incorrect!
If you read the above message, switch off the unit by pressing the
power
key. Please wait until the display no longer reads
Going to sleep...
.
Disconnect the PRE1 G3 from mains by operating the mains switch 1 .
Now pull the mains plug and re-insert it into the mains socket rotated by
180°.
If you switch on the unit again, the warning should not appear now.
Important
·
If the PRE1 G3 issues the mains polarization warning or no warning
at all for both positions of the mains plug, check the connection to
earth of your mains socket and mains cord.
You have to ensure a
stable connection to earth for the mains phase detection of the
PRE1 G3 to work correctly!
6.4 Using Audionet Link
Your PRE1 G3 is equipped with two 'Audionet Link' outputs
OUT 1
18
and
OUT 2
19 allowing you to switch on/off further Audionet units
(e.g. power amplifiers, CD player or tuner) connected via 'Audionet Link'
(also see section '
Audionet Link
' on page 13).
If the rest of your Audionet system is connected to your PRE1 G3 via
'Audionet Link', all linked units will be automatically switched on /off as
soon as you switch on/off your PRE1 G3 using the
power
key on the
front panel or the Audionet System Remote Control
Harmony One
.
Note
·
The 'switch on/off' signal of the 'Audionet Link' output
OUT 2
19 is
issued depending on the headphones settings (see section '
Set Head-
phones
' on page 24).
·
Please read section '
Audionet Link
' on page 13. Also, consult the
user's manual of your Audionet components connected via 'Audionet
Link' for further information.
Summary of Contents for PREI G3
Page 1: ...1 Stereo Pre Amplifier User s Manual ...
Page 2: ...2 ...
