34
8.2
Global setup
8.2.1 Select Input
Push the
set
key on the front panel once for less than two seconds or push
the key
ä
on the Audionet Metal Remote Control
RC 2
to enter the
Se-
lect Input
menu item. Then select the desired input channel with the
keys
up
and
down
or with the keys
◄
/
►
on the remote control. In the
display, you see the selected input channel, channel number and your
chosen channel name. Press
set
or
OK
to actually switch to the selected
channel.
Overview of DNC input channels:
No.
Inputs
Signal
see
3 - Overview back
panel on page 10
1
D1
Digital (electrical)
Digital Inputs
IN 1
15
2
D2
Digital (electrical)
Digital Inputs
IN 2
15
3
D3
Digital (AES/EBU)
Digital Inputs
IN 3
14
4
D4
Digital (optical)
Digital Inputs
IN 5
20
5
D5
Digital (optical)
Digital Inputs
IN 6
20
6
NET
Stream, USB, Internet radio
Network 10 12 21
7
USB
USB Audio In
USB Audio 11
8
FM
FM Tuner
FM Antenna 13
While switching of inputs, the outputs are switched off at first. Once an
input is selected, the outputs are switched on again.
Note
·
Leave the input selection function by holding down the
set
key
longer than 2 seconds or wait just a few seconds.
·
Using the Audionet Metal Remote Control
RC 2
, switch to the next
or previous input channel without using the
Select Input
function
with keys
CH+
and
CH-
.
