38
8.3.5 By-Pass channel
Select the analog input channel you would like to use for By-Pass mode.
Tip
·
For a more comfortable access, use the directional keys
◄
/
►
on the
Audionet Metal Remote Control
RC 2
(see section
"7 -
Audionet
Metal Remote Control RC 2
"
on page 27). Acknowledge your
selection with the
OK
key.
Important
·
Before you are able to use the By-Pass Mode you have to select the
input channel that is used for the By-Pass Mode.
·
For safety reasons the factory default settings have
no
input channel
selected for By-Pass Mode (display:
By-Pass mode disabled
).
The By-Pass Mode was primarily intended to integrate the overwhelming
sound quality of the DNA 1 into an existing home cinema setup or to
expand an existing excellent stereophonic system based on the DNA 1 to
a complete home cinema setup without missing out on the qualities of the
DNA 1. To realize this kind of setup, please proceed as follows:
1.
Connect your home cinema preamplifier according to its user's
manual.
2.
Connect the output for the front channels Left and Right not to the
power amplifier but to one of the free analog inputs
IN 2
or
IN 3
of
the DNA 1.
3.
Use menu item
By-Pass channel
of the setup menu of the DNA 1 to
select the input channel for By-Pass Mode you connected the outputs
Left and Right of the home cinema preamplifier to.
4.
Connect now all high quality 2-channel sources to the remaining
inputs of the DNA 1.
5.
Connect your DVD player to your home cinema preamplifier as
usual.
►
SET INPUT CHANNEL
◄
►
FOR BY-PASS MODE:
◄
By-Pass mode disabled
By-Pass channel
selection
Title
Summary of Contents for DNA
Page 1: ...audionet DNA 1 Digital Network Amplifier User s Manual ...
Page 2: ......
