23
6.2.2 Volume control
While the DNA 1 is in normal operating mode, use the keys
up
and
down
on the front panel to adjust the volume.
up
increases,
down
decreases the
volume. The volume control of the DNA 1 runs in a range from
-80dB
(quiet) to
+10dB
(very loud) in actual 1 dB steps relative to the level of
the input signal. You may also control the volume with your Audionet
Metal Remote Control
RC 2
or the software Audionet RCP as well as the
apps for tablets aMM and iMM.
6.2.3 Muting
Note
·
The muting function is available with the Audionet Metal Remote
Control
RC 2
(see section
"7.1 - Key Assignment RC 2" on page
28
).
·
You can also use software Audionet RCP and the apps aMM and
iMM to mute your DNA 1
Press key of the Audionet Metal Remote Control
RC 2
to mute or un-
mute your DNA 1.
Just as well as the input selection, the DNA 1 uses soft muting, i.e.
volume is stepped down gently to -80 dB, and then the outputs are
switched off. The display informs the user of a muted unit with the text
MUTE
. Even if the dim level is set to
Off
, the text is displayed.
To un-mute the DNA 1 press key again. Here as well, the volume is
stepped up gently to its original level after switching on the outputs.
Note
·
While the unit is muted, you may of course select a different input
channel. But the DNA 1 will stay muted until you press the key
again to un-mute and restore the original volume level.
·
If you turn up the volume by using the
up
key or
VOL+
, while the
DNA 1 is muted, the muting function will be deactivated and the new
volume level set.
Summary of Contents for DNA
Page 1: ...audionet DNA 1 Digital Network Amplifier User s Manual ...
Page 2: ......
