16
6
Usage
All functions of the DNA 1 are microprocessor controlled. This
guarantees highest precision, exclusive functions, easy handling and
protection against operating errors.
6.1
Basic operations
6.1.1 Powering up
First of all, please make sure your DNA 1 is connected correctly to your
signal sources, power amplifier(s) and mains (see section
"4 -
Installation and power
supply" on page 10
and
"5 - Inputs and
outputs" on page 12
).
The DNA 1 is a stand-by unit. Please operate the mains switch 10 on the
back panel. The display shows a welcome message for a brief moment.
After that the DNA 1 is in stand-by mode.
Only in cases of extended absence (like vacations) or if massive trouble
on the mains power is to be expected (e.g. thunder storms) it is
recommended to disconnect the DNA 1 from the mains. While the
DNA 1 is in stand-by mode, operate mains switch 10 on the back panel.
The display will go dark. To disconnect the DNA 1 from mains
completely, you have to pull the mains cord off the mains jack 8 .
Important
·
Before you switch off the DNA 1 from mains, power down and
discharge completely all units connected to the outputs of the
DNA 1.
Summary of Contents for DNA
Page 1: ...audionet DNA 1 Digital Network Amplifier User s Manual ...
Page 2: ......
