31
8
Device setup
To adjust the DNA 1 to your preferences, please use the setup menu. You
can control the menu with the keys on the front panel of your DNA 1 or
with your remote control. For more comfortable adjustment use our
software Audionet RCP. You only need to integrate your DNA 1 to your
network (see section:
"8.4.10 - Example
for
Network
setup" on page
56
).
To control your DNA 1 with front panel keys, use
set
,
up
and
down
.
set
To open the system menu press and hold the key for
more than 2 seconds. Leave the menu without saving any
change, press and hold the key again for longer than 2
seconds. Short keystroke saves/applies a menu item or
you branch into marked menu item.
up
,
down
are used to select setup menu items or change parameters.
For a more comfortable access, use the directional keys on the Audionet
Metal Remote Control
RC 2
(see section
"7 -
Audionet Metal Remote
Control RC 2
"
on page 27).
The most comfortable way to setup your DNA 1 is to use our software
Audionet RCP. Use mouse and keyboard to adjust each parameter. The
computer display provides all information at a glance (see also Audionet
RCP user's manual).
Note
·
Changes will only take effect if you push the
OK
key on your remote
control or push the
set
key shortly on the DNA 1 front panel.
·
Within menus with more than one page the fastest way to reach the
last entries is to press
up
. E.g. to get entry
9 of 9
, open the main
menu (marker is at
1 of 9
) and press
up
once instead of striking
down
several times. Use the same procedure with keys
▲
/
▼
on the
Audionet Metal Remote Control
RC 2
.
Summary of Contents for DNA
Page 1: ...audionet DNA 1 Digital Network Amplifier User s Manual ...
Page 2: ......
