13
To make easier the new codes composition, we suggest to replace only one punch at the time,
leaving the other ones in the punch-seat.
e) When the new composition is done, close manually the upper jaw to get punches bedding in their
seat, than tighten ligthly the two screws (n° 3 pict e2) of the blocking code-punches plate (n°1 pict. e2).
f) Put the upper protection (n°4 pict. d) in the original position and fix it tightening the screws (n° 2 pict.
e2).
Employ always the machine with the upper protection completely down and fixed by its blocking
screws (n° 2 pict. e2).
pict. e1
pict. e2
1
2
3
1
3
2
1
2
