AUDIOLINE TEL38CLIP, Operating Instructions Manual

Page: 37 / 44

- Caller display (CLIP) -
37
6.1 Viewing the caller list
Before using the caller list, the CLIP caller list function must be switched on. You
can be switched between the phone book and the caller list with the
CLIP button.
Therefore make sure that the display message CLIP is on. You can page through
the caller list using the Jogdial. All calls registered will be shown as follows:
11:43 16/1
08
NEW
01234 / 56789
Time/date of call
Number has
been newly
registered
Store location in
the caller list
currently selected
CLIP
When you reach the last storage location in the list, the display will show the
message
ENDE DER LISTE .
Note!
When all newly recorded numbers have been checked, the new call indicator light
goes off and the
NEW indicator in the display shows "0".
If no button is pressed within 30 seconds, the caller list is no longer displayed and
the display shows the current time and date once more along with the number of
telephone numbers stored in the caller list and the number of newly stored
telephone numbers.
6.2 Dialling a telephone number directly from the caller
list
You can dial telephone numbers directly from the caller list.
1.
Select the required telephone number using the Jogdial.
2. To dial the number, press the
ENTER
button. The Display will show the
message HOERER ABNEHMEN .
3. Now lift the receiver or press the handsfree button . The display will
show the message WAEHLEN and the connection will be made.
Note!
Before dialling, your telephone compares the country and local dialling codes of
the number selected with your location (c local dialling code). If you have
entered your country and local dialling code during installation, the appropriate
numbers will not be dialled if this is a number from within your country or local
network.