- The phone book -
33
5 The phone book
Using your telephone, you can store 100 telephone numbers with associated
names in the phone book.
When the memory capacity of 100 numbers has been used, the display will show
the message
SPEICHER VOLL
the next time an attempt is made to store a
number. In this case, other telephone numbers must be deleted first.
Note:
Before using the phone book, the CLIP caller list function must be switched
off. You can be switched between the phone book and the caller list with the
CLIP
button. Therefore make sure that the display message CLIP is not on.
5.1 Storing telephone numbers in the phone book
1. Press the Store button
. The display will show
SPEICHERN?
2. Press the Store button again
.
3. Enter the required telephone number with a maximum of 22 digits using the
number pad.
4. Press the Store button
.
5. Enter the required name with a maximum of 16 letters. The next section will
tell you how to enter names.
6. Press the Store button
. The display will show the message
GESPEICHERT!
How to enter names
The number buttons are also inscribed with letters for entering the name. By
repeatedly pressing the appropriate button, upper case letters as well as numbers
and special characters can be entered.
Example: You wish to enter the name “Peter”.
Press: 1 x button 7, 2 x button 3, 1 x button 8, 2 x button 3, 3 x button 7
To enter a space, press the 1 button once.
To enter the same letter twice, press the appropriate button and turn the jog dial
once to the right. The cursor will automatically jump one place further and you
can enter the same letter again.
Incorrect entries can be deleted with the button. To do this, move the cursor to
the correct position using the jog dial and then press the
button.
Summary of Contents for TEL38CLIP
Page 22: ... Wichtige Informationen 22 ...
Page 43: ... Important information 43 ...
