AUDIOLINE TEL38CLIP, Operating Instructions Manual

Page: 31 / 44

- Operation -
31
4.2 Receiving Calls
Calls can be accepted either by using the receiver or by using the handsfree
facility. Lift the receiver or use the handsfree facility by pressing the handsfree
button .
To end the call, replace the receiver or press the handsfree button .
4.3 Call Duration Display
The call duration is shown in the display in minutes and seconds during a call. The
indication starts after the number has been dialled. The call duration still remains
showing in the display for a few seconds after the call has been ended.
If you want to reset the display during a call, simply press the
button. The
display will reset immediately to 00:00.
4.4 Redialling
If a connection that you have dialled is engaged or you were unable to get
through to anybody, simply replace the receiver. The last number dialled with a
maximum of 32 digits will be saved in the telephone automatically. To use the
redial facility, proceed as follows:
1. Lift the receiver or press the handsfree button .
2. Press the redial button . The saved redial number will now be dialled.
4.5 Muting the microphone
You can switch off the microphone during a call using the mute button, . It is
thus possible to speak without the other party hearing you. The loudspeaker
remains switched on and you can continue to hear the other party.
1. To mute the microphone, press the mute button once while a call is being
made. The indicator light in the button will come on.
2. To switch the microphone on again, press the mute button once more.
The indicator light will go out and you will be able to continue your call as
normal.