AUDIOLINE TEL38CLIP, Operating Instructions Manual

Page: 26 / 44

- Commissioning -
26
3 Commissioning
3.1 General information
NOTE! Before commissioning, it is essential that you read the general information
at the beginning of this manual.
3.2 Check contents of pack
The following items are supplied:
one telephone base
one telephone receiver
one telephone connection cable one spiral cable
one desk adapter one Operating Manual
four batteries Type AAA
3.3 Fitting the batteries
Before connecting your new telephone to the telephone network, the batteries
should be fitted. Please always use type AAA alkaline batteries. The batteries are
required for the call number display, the handsfree feature and other functions of
the telephone. Before installing or changing the battery, make sure that the
telephone is not connected to the telephone network.
Note: No messages will be shown in the display and the handsfree facility will not
work if the batteries are not fitted.
1. The battery compartment is to be found on the underside of your telephone.
2. Open the battery compartment with a small screwdriver or a pointed object.
3. Insert the batteries, ensuring that the polarity is correct.
4. Close the battery compartment.
The battery should be changed when the symbol appears in the display.
All four batteries must then be changed so that the call number display and the
handsfree facility continue to work correctly.
If the batteries become discharged, the display will go dark and the handsfree
facility will not work.
3.4 Connecting the telephone receiver
After unpacking your telephone, you must first connect the telephone receiver to
the base unit. First take the short end of the spiral cable and plug it into the
socket at the bottom of the receiver. Turn the telephone over and plug the long
end into the socket marked
HANDSET . Feed the cable through the cable channel
to the outside.