- Commissioning -
20
3 Commissioning
3.1 Safety
information
NOTE! Before commissioning, it is essential that you read the general information
at the beginning of this manual.
3.2 Check contents of pack
The following items are supplied:
one telephone base
one telephone receiver
one telephone connection cable
one spiral cable
one desk adapter
one Operating Manual
one battery type AAA
3.3 Fitting the battery
Before connecting your new telephone to the telephone network, the battery
should be fitted. Please always use a type AAA alkaline battery. The battery is
required for the display, the handsfree feature and other functions of the
telephone. Before installing or changing the battery, make sure that the telephone
is not connected to the telephone network.
Note: No messages will be shown in the display if a battery is not fitted.
1. Make sure that the telephone is not connected to the telephone network.
2. The battery compartment is to be found on the underside of your telephone.
3. Open the battery compartment with a small screwdriver or a pointed object.
4. Insert the battery, ensuring that the polarity is correct.
5. Close the battery compartment.
The battery should be changed when the display can no longer be read properly.
If the battery is completely discharged, then you could lose stored telephone
numbers.
3.4 Connecting the telephone receiver
After unpacking your telephone, you must first connect the telephone receiver to
the base unit. First take the short end of the spiral cable and plug it into the
socket at the bottom of the receiver. Turn the telephone over and plug the long
end of the siral cable into the socket marked
. Feed the cable through the
cable channel to the outside.
