- Commissioning -
22
3.8 Wall
mounting
Your telephone is also suitable for wall mounting. Use two screws for fixing. Drill
two holes horizontally side by side, 70 mm apart, and leave the screws protruding
from the wall by 5mm. Now place the telephone without the desk support over the
screws and push it slightly downwards.
There is a small hanging device in the receiver rest to prevent the receiver from
falling when it is placed on the rest with the telephone mounted on the wall. Using
a small screwdriver, turn this hanging device until a small hook appears at the
upper end.
If you are using the telephone fitted to the wall, you can hang the receiver on the
telephone without hanging up. You will find a small hook for this purpose at the
upper end of the receiver rest.
3.9 Setting the time
If you want to reset the time or change a time already entered, proceed as
follows:
1. Press
the
SET
button. The hours display will flash.
2. Press
the button several times or keep the button pressed until the
correct number of hours appears in the display.
3. Press
the
SET
button again. The minutes display will flash.
4. Press
the button several times or keep the button pressed until the
correct number of minutes appears in the display.
5. The current time of day is started by pressing the
SET
button, whereby the
seconds display automatically jumps to “00”.
Note: If the battery is completely discharged, it will be necessary to re-enter the
time of day.
