background image

®

2

Cool & Different 

Features

Cool and Different Features

Unlike Other Amplifiers

Here is a list and description of features that are part of 

The Director series from AudioControl. Most are rare or non-
existent in other companies’ amplifiers. 

New Features

• 

DHCP:

 An IP address for The Director Model D3400 

and D4400 is obtained via DHCP by default. If a DHCP serv

-

er is not found on the network, The Director Model D3400 
and The Director Model D4400 will default to 192.168.0.249.

• 

UP

n

P:

 Device discovery is enabled on The Director 

Models D3400 and D4400 for ease of connectivity from a PC.

• 

n

Umbering

:

 In the device discovery /UPnP window, if 

you are using multiple Director amplifiers, you will find that 
each Director is numbered in the sequence they were added 
onto the network.

• 

g

roUPs

:

 Grouping has been enabled for quick control 

of zones through Telnet commands. Up to 4 groups can be 
defined for control over Standby and Source Selection.

• 

i

mPort

/e

xPort

:

 Exporting and Importing of the ampli

-

fier’s settings – including EQ settings – has been enabled. 
Now you can configure your EQ settings as a template and 
apply these to each Director amplifier in your system.A little 
refining of those settings for each amp and you will be in and 
out in no time.

• 

E

thErnEt

 C

ontrol

:

 Via a browser or Telnet commands 

you can control and query almost all the functions of The 
Director. You can mute zones, change source inputs, adjust 
equalization, recall memories, check line voltage, display pro

-

tection logs and get an email if something goes wrong. And 
this is only a partial list!

• 

S

ignal

 P

roCESSing

:

 You have at your command graphic 

equalization, parametric equalization, tweeter protection 
filters and low frequency cutoff filters. In addition, you can 
set up two zones with a two way crossover. The equalizer set

-

tings are ganged left and right channels together or your can 
separate. Plus, there are three memories to save and recall 
settings.

Summary of Contents for The Director D3400













































Reviews: