AudioControl maestro m9 User Experience Manual Download Page 41

Page: 41 / 48

MAESTRO M9

Audio

The audio doesn’t match the video

The Video and Audio input can be selected independently in the

Main Menu. Verify they are set the same.

Verify the correct Video Input and Digital Audio input assignments

are configured for the Source input button.

The sound is poor or distorted

Verify the speaker settings configuration matches your speakers. If

a speaker is set to Large and it cannot reproduce full range bass, you will
hear distortion.

If the trouble is only on some channels: Verify the audio RCA cables

to the power amplifiers are working and seated properly.

If the trouble is in all channels: Verify the Input Trim setting in the

Advanced Configurations is not set too low.

Cannot select Dolby Digital or DTS decoding mode

The Maestro M9 can only decode formats encoded onto the source.

Normally these are marked on the packaging or liner notes of the material.

Verify that the correct format is selected in the Start menu of the

DVD.

Verify that the digital input from the source is properly connected to

the Maestro M9.

Verify that the digital output of the source is enabled. Some DVD

players have a setup menu that can only be accessed if there is no disk in
the player.

roubleSHootIng

Summary of Contents for maestro m9

















































Search results

Summary of Contents for maestro m9

Reviews:

Related manuals for maestro m9

Brands by name

Popular brands

AudioControl maestro m9, User Experience Manual

Search results

Summary of Contents for maestro m9

Reviews:

Related manuals for maestro m9

Brands by name

Popular brands