AudioControl LC6i, User Manual

Page: 7 / 32

----------------------------------------------- 7 -----------------------------------------------
Quick Installation Information
For those of you who are short on time but high on ambition, we offer
the following section to speed up your installation of the LC6i:
1. Physically mount the LC6i in a location that keeps it away from
soda spills, food crumbs, and the curious fingers of those you have
wronged. You will want to select a location that allows you access
to the level controls. In many cases you can find factory speaker
leads in the rear of the vehicle that are easy to access.
2. The LC6i needs to be installed in the signal path between your OEM
source unit or factory-installed amplifier(s) and an aftermarket
external amplifier and/or processor(s). Locate the speaker wires
that are coming from your factory source unit and/or amplifier and
connect them to the speaker-level inputs on your LC6i.
3.
Connect the Output RCA connectors to cables that run to your
aftermarket external signal processors and/or amplifiers. If this
is not obvious to you, quickly pack up your LC6i and run to your
nearest authorized AudioControl dealer to have them perform the
installation. You will thank us later.
4.
C12V power, ground, and remote turn-on (if applicable).
5.
Level match your LC6i to your source and amplifiers.
Note: You will want to turn the gains DOWN on your aftermarket ampli-
fiers to maximize your systems performance and minimize any HISS.
The example on the next page shows the use of the LC6i with an
AudioControl multi-channel power amplifier.