AudioControl LC6i, User Manual

Page: 20 / 32

-----------------------------------------------20 ----------------------------------------------
Speaker-Level Inputs
The LC6i is designed to accept an amplified, speaker-level signal from
a factory source unit or amplifier. You will want to refer to a facto-
ry service manual or wiring-harness schematic to determine which
wires are the speaker wires for your system. If you are unsure which
wires are the speaker wires, it is recommended you look at the color
of the speaker wire connected to the speakers and follow them back
to the factory source or amplifier. Connect the speaker wires to the
Speaker-Level Inputs on your LC6i. Make sure to get your “pluses” and
“minuses” connected properly.
Pre-Amp Outputs
Connect good quality RCA connectors from these outputs to the inputs
of your amplifiers. While we won’t get into the discussion as to wheth-
er plutonium cables sound better than un-obtainium cables we will
tell you that well-constructed cables are less problematic in a rugged
environment like your car system.