AudioControl DQDX Page 29 User Manual Download

Page: 29 / 32

-----------------------------------------------

----------------------------------------------

4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B)

somebody authorized in writing by AudioControl to service your

DQDX. If anyone other than (A) or (B) messes with your DQDX, that

voids your warranty.

5. The warranty is also void if the serial number is altered or removed,

or if the DQDX has been used improperly. Now that may sound like

a big loophole, but here is all we mean by it. Unwarranted abuse

is: (A) physical damage (don’t use the DQDX for a car jack); (B) im-

proper connections (120 volts into the power jack can fry the poor

thing); (C) sadistic things. This is the best product we know how to

build, but if you mount it to the front bumper of your car, some-

thing will go wrong. If an authorized United States AudioControl

dealer installs the DQDX, the warranty is five years. Assuming you

conform to 1 through 5, and it really isn’t all that hard to do, we get

the option of fixing your old unit or replacing it with a new one.

LEGALESE SECTION

This is the only warranty given by AudioControl. This warranty gives

you specific legal rights that vary from state to state. Promises of how

well the DQDX will perform are not implied by this warranty. Other

than what we have covered in this warranty, we have no obligation,

express or implied. Also, we will not be obligated for direct or indirect

consequential damage to your system caused by hooking up the DQDX.

Failure to register warranty information negates any service claims.

Summary of Contents for DQDX

































Search results

Summary of Contents for DQDX

Reviews:

Related manuals for DQDX

Brands by name

Popular brands

AudioControl DQDX, User Manual

Search results

Summary of Contents for DQDX

Reviews:

Related manuals for DQDX

Brands by name

Popular brands