®
23
n
avIgatIng
tHe
s
et
-u
p
M
enus
If at any point you need
to reset the video output
resolution and frame rate to
the default setting, push and
hold the “Select” button for 3
seconds.
C
onCert
avr
-
8 /
avr
-
6
Initial Display Configurations
Your Concert AVR-6 / AVR-8 is set to “Preferred” in the Video Output set-
tings menu. This allows the AVR’s output resolution to be defined by the
display’s capabilities in regards to it’s pixel count and frequency output. You
can change this setting to a fixed Output Resolution or you can Bypass the
resolution setting in order to bypass the scaler used by the Concert AVR-
6 / AVR-8. You do this by way of the Video Output settings menu.
Please
note, any Component or Composite source will be upscaled to the display’s
native resolution if Bypass has been selected.
Configurations For 1080p/24 Applications
The Concert AVR-6 / AVR-8 supports both 1080p/24 fps (frames per sec-
ond) and the more commonly used 1080p/60 fps video formats. To prop-
erly utilize the 1080p/24 format you will want to make sure that the source
device (i.e. Blu-ray player) and the display device (i.e. projector or TV) are
both capable of supporting this format. In the Video Output section of the
Setup menus, set the Output Resolution of your Concert AVR-6 / AVR-8
to 1080p (not Preferred) and make sure that the Frame Rate is set to follow
input. Failure to do any of the above could result in no image.
Navigating
Navigating the Set-Up Menus is a very simple process that can be done
using the appropriate front panel controls on your Concert AVR-6 / AVR-8
or by using the HTR-1 remote control that incorporates the appropriate IR
codes.
1. Press the Menu button once to enter the Setup Menus. The word
“Menu”
will appear on the display of your Concert AVR-6 / AVR-8 and
the actual menu will appear on your display device.
2. Use the Input selection button “Input
∧
” and “Input
∨
” to navigate
among the menu’s and use the “
<
Info” and “Mode
>
” buttons to select
appropriate menu screen.
3. Press the “SELECT” button or “OK” to select the menu options.
4. Press the Menu button anytime to exit the Menu screens and any setting
changes will be saved automatically.