®
12
C
onCert
avr
-
8 /
avr
-
6
u
MAIN POWER SWITCH -
The only time to
turn OFF the Concert AVR-6 / AVR-8 with this
switch is when the system will not be used for some
time. Normally this switch is left on. When this
switch is turned off, you cannot turn the Concert
AVR-6 / AVR-8 On or Off via any other method.
v
VOLTAGE SELECTION -
The Concert
AVR-6 / AVR-8 is designed to operate with either
110-120V volt or 220-240V line voltages. You will
want to set this switch to match up with your local
power voltages.
w
POWER CONNECTION -
All good AC power
flows in here.
x
ZONE 2 VIDEO OUTPUT -
This second zone
output enables viewing a source independently of the
main theater system.
y
DIGITAL AUDIO CONNECTIONS -
The
Concert AVR-6 / AVR-8 features assignable coaxial
and optical digital audio inputs and outputs. While
we have labeled them with the names of typical
source units, these connections as assignable via the
internal menus.
Rear Panel Features
g
uIded
t
our
of
tHe
C
onCert
avr-8 / avr-6
z
ANALOG AUDIO INPUTS AND OUTPUTS
-
Connect the appropriate analog two channel stereo
outputs and inputs from your source units here.
{
ANTENNA CONNECTIONS -
These inputs
should be connected to the AM and FM antennas
that are supplied with your Concert AVR-6 / AVR-8.
For optimum reception you may want to consider a
roof mounted external antenna.
|
CONTROL PORT -
Use this connection to con-
trol the Maestro M4 with an automation system.
}
NETWORKED AND USB AUDIO INPUTS -
Your Concert AVR-6 / AVR-8 has the ability to ac-
cept audio files via an Ethernet connection or from a
USB mass storage device.
~
12 VOLT TRIGGER OUTPUTS -
These three
outputs provide a +12 volt signal to control the
power amplifiers, source units, video projector, screens
and curtains in the theater. The Main Trigger output
is active whenever the Concert AVR-6 / AVR-8 is
turned on; the Video Trigger 2 is active whenever a
video source is selected.
u
w
z
~
{
y
v
x
|
}
