®
13
C
onCert
avr
-
8 /
avr
-
6
g
uIded
t
our
of
tHe
C
onCeret
avr-8 / avr-6
IR (INFRARED) INPUTS -
These jacks enable
use of external IR sensors and emitters for installa-
tions where it is not desirable (or practical) to use the
front panel IR.
MAIN AUDIO OUTPUTS -
These RCA
outputs can feed external power amplifier(s), should
you choose to not use the amplifier built-in to your
Concert AVR-6 / AVR-8. (Our customers tell us that
our AudioControl Savoy 7-channel amplifier works
great in these situations).
HDMI INPUTS & OUTPUTS -
These inputs
allow the Concert AVR-6 / AVR-8 to accept digital
audio and video signals from source units equipped
with HDMI (High Definition Multimedia Interface)
outputs. Make sure your HDMI cables are properly
inserted into these connectors and that there no
sharp “pulls” on the cable that may prevent your con-
nectors from making a complete connection.
COMPOSITE AND COMPONENT INPUTS -
These are for the video inputs and outputs from your
source units. If you are planning on using the second
zone video outputs, you should ALWAYS connect a
Composite video input from each source.
HEADPHONE CONNECTOR -
This jack ac-
cepts an 1/8” input for using headphones with imped-
ance ratings of 32 to 600 ohms.
AUx INPUT -
This Aux input is used in conjunc-
tion with the auto-setup microphone. Additionally it
can also accept either analog or optical digital signals.
SPEAKER CONNECTIONS -
These 5 way
binding posts allow you to connect the main speakers
for your two, five, or seven channel systems. Make
sure that the red (po) wires are connected to
the red (po) connector on the back if your
Concert AVR-6 / AVR-8. Likewise the black (nega-
tive/-) wires should be connected to the black (nega-
tive/-) connectors on the back of the Concert AVR-6
/ AVR-8 to maintain proper speaker polarity.
