background image

Phone 425-775-8461 • www.audiocontrol.com

®

Specifications

Concert AVR-1 Home Theater Receiver Specifications

Inputs

Analog Audio Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Stereo Pairs
Nominal Audio Input Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mV-4V
Input Impedance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 ohms
Signal-to-noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100dB
Multi-channel Analog Audio Input . . . . . . . . . . . . . . . . . . . . . . . . . 1 (8 channels)
Digital Audio Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Coax, 4 Optical
Video Inputs . . . . . . . . . . . . . . . . . . . . . . .  5 Component,  5 Composite, 5 S-Video
HDMI Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Outputs

Speaker Level Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seven
Power Output . . . . . . .  120 Watts Per Channel, All Channels Driven into 8 ohms
Minimum Speaker Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ohms
Total Harmonic Distortion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  less than 0.2%
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz to 20kHz
HDMI Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 assignable
Main Audio Outputs . . . . . . . . . . . . . . . . . . . . . . . 7 main channels, 3 subwoofers
Digital Audio Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Coax, 1 Optical
Main Video Outputs. . . . . . . . . . . . . . . . . . 1 Component, 3 Composite, 3 S-Video
Second Zone Output . . . . . . . . . . . . . . . Stereo Audio plus Composite & S-Video
Third Zone Output  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo Audio

Control Audio

12 Volt Trigger Outputs . . . . . . . . . . . . . . . . . . . . . . Three - Main, Zone 2, Zone 3
RS-232 Serial Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - DB-9
IR Receiver Input. . . . . . . . . . . Three – Main, Zone 2, Zone 3 (3.5 mm Minijack)
IR Emitter Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .One (3.5 mm Minijack)

General

Power Consumption (Standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Watts
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17”W x 16.5”D x 7H
Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 lbs

s

peCIfICaTIons

Summary of Contents for Concert AVR-1

























































Reviews: