Phone 425-775-8461 • www.audiocontrol.com
®
20
Configurations For 1080p/24 Applications
The Concert AVR-1 supports both 1080p/24 fps (frames per second) and
the more commonly used 1080p/60 fps video formats. To properly utilize
the 1080p/24 format you will want to make sure that the source device
(i.e. Blu-ray player) and the display device (i.e. projector or TV) are both
capable of supporting this format. In the Video Output section of the Setup
menus, set the Output Resolution of your Concert AVR-1 to 1080p (not
Preferred) and make sure that the Frame Rate is set to Auto. Failure to do
any of the above could result in no image.
To get started and view these set-up menus it is very important that you
have one of the video outputs (Component, HDMI, composite, or S-Video)
of your Concert AVR-1 connected to your video display device (i.e. projec-
tor, flat panel, TV). This is absolutely necessary to see the set-up menus.
In the event you need to reset the output resolution and frame rate to the
factory settings, it is simply a matter of pressing and holding the “SELECT”
button for three seconds.
Navigating
Navigating the Set-Up Menus is a very simple process that can be done
using the appropriate front panel controls on your Concert AVR-1 or by
using an IR remote control (sold separately) that incorporates the appropri-
ate IR codes.
1. Press the Menu button once to enter the Setup Menus. The word
“Menu”
will appear on the display of your Concert AVR-1.
2. Use the Input selection button “Input
∧
” and “Input
∨
” to navigate
among the menu’s and use the “
<
Info” and “Mode
>
” buttons to select
appropriate menu screen.
3. Press the “SELECT” button to select the menu options.
4. Press the Menu button anytime to exit the Menu screens and any setting
changes will be saved automatically.
INSTALL TIP
*
n
aVIgaTIng
THe
s
eT
-u
p
M
enus
