Phone 425-775-8461 • www.audiocontrol.com
®
23
Left/Right -
Full frequency audio will be sent to your front left and
right speakers with no information going to the subwoofer.
Left/Right+Sub -
Full frequency audio will be sent to your front left
and right speakers plus bass information is directed to your subwoofer
effectively duplicating the lower frequencies
Sat+Sub -
Full frequency audio signals are sent to your front left and
right speakers with the bass information being directed to only your sub-
woofer. Your front speakers will only reproduce the upper frequencies.
SUB STEREO -
If you have selected the “Left/Right+Sub” or “Sat+Sub”
setting in the “Stereo Mode” menu, then this setting adjusts the level of the
subwoofer when you are using a two-channel source.
BRIGHTNESS -
This video setting adjusts the brightness for this input,
providing you are using a video equipped source unit.
CONTRAST -
This video setting adjusts the contrast for this input.
COLOR -
This video setting adjusts the color saturation for this input.
PICTURE MODE -
The setting options are Video, Film, or Auto with the
default being Auto. The video processor in the Concert AVR-1 normally
automatically detects the original source type and properly sets the Video
mode or Film mode processing. Occasionally some source material is unable
to be interpreted properly by the processor, which may require a manual
adjustment.
EDGE ENHANCEMENT -
This video feature sharpens the picture.
MOSQUITO N.R. -
This video feature removes haziness that sometimes
appears around objects in a picture.
NOISE REDUCTION -
This video feature removes random video noise
that may appear on the picture from a source unit.
BLOCK N.R. -
This video feature removes block artifacts in overly com-
pressed digital video signals
COMPONENT MODE -
This mode allows you to configure the compo-
nent video input of your source unit to properly match up with your display
device. Setting options are “Normal”, “RGsB” and “RG+Sync”.
Normal:
Configures output for standard Component (YPbPr) analog
video.
RGsB:
Configures for RGB analogue video with video “sync on green”
RGB+Sync:
Configures for RBG analogue video with sync on the
composite input for the selected source.
n
aVIgaTIng
THe
s
eT
-u
p
M
enus
