AudioCodes Mediant 1000B SBA, Installation And Maintenance Manual

Page: 50 / 298

Installation & Maintenance Manual 50 Document #: LTRT-40111
Mediant 1000B SBA
5. Log in with the default, case-sensitive user name (“Admin”) and password (“Admin”),
and then click OK; the Web interface appears, displaying the Home page.
6. Change your OAMP interface as described in the next chapter.
7.2 Changing OAMP Interface
Once you have accessed your device using the default IP address, you can change your
management interface (OAMP) to suit your network environment. Maintain the same cable
connection that you used when you initially accessed the device.
 To change the OAMP IP address:
1. Modify the device's physical Ethernet port-pair (group) that you wish to assign to the
OAMP interface in the Physical Ports Settings page ( Configuration tab > VoIP menu
>
Network
>
Physical Ports Settings
). For more information, see Section 7.3 on
page 51 .
2. Configure a LAN network address so that it corresponds to your network IP
addressing scheme and configure the physical LAN port-pair in the Multiple Interface
Table page (
Configuration
tab >
VoIP
menu >
Network
submenu >
IP Settings
), as
shown in the figure below.
Figure 7-3: IP Settings Screen
a. Select the 'Index' radio button corresponding to the Application Type OAMP +
Media + Control"(i.e., the VoIP and Management LAN interface), and then click
Edit
.
b. From the 'Underlying Interface' drop-down list, select the physical LAN port-pair
group that you want to assign to the interface.
c. Click Apply , and then click Done to apply and validate your settings.
d.
On the toolbar, from the Device Actions drop-down list, choose
Reset
, and then
in the‘ Maintenance Actions’ page, click the Reset button; the Mediant 1000B
resets and your settings are saved to the flash memory.
Figure 7-4: Maintenance Actions: Reset Gateway
3. Maintain the cabled connection between the Mediant 1000B LAN port and the
computer.