AudioCodes Mediant 1000B SBA, Installation And Maintenance Manual

Page: 115 / 298

Installation & Maintenance Manual 11. Installing and Configuring the SBA
Version 6.8 115 Microsoft Lync Server
11.13 Step 13: Configure Gateway and Test Calls
The Gateway Configuration option enables you to connect to the Web-based interface of
the PSTN Gateway functionality of the Mediant 1000B SBA in order to configure the
gateway for testing calls to the PSTN.
Note:
Before testing gateway calls:
• Ensure that you have connected the PSTN gateway as described in Chapter 7 .
• Ensure that you have configured PSTN call routing (for more information, refer to the
Mediant 1000B MSBR User's Manual ).

To configure the gateway and run test calls:
1. Select the Setup tab, and then select the 'Gateway Configuration' check box; the
following screen appears:
Figure 11-55: Gateway and Endpoint Configuration
2. In the ‘Gateway’ field, enter the IP address or DNS name of the Mediant 1000B.
3. In the 'Phone Number' field, enter the endpoint phone number for which you wish to
test the call.
4. In the ‘DTMF’ field, enter any DTMF string. This DTMF string will be heard when the
user picks up the phone handset (optional).
5. If you changed the Web/Telnet login username and password of the PSTN Gateway,
then enter their values in the ‘Username’ and ‘Password’ fields respectively;
otherwise, leave the fields as is.
6.
Click
Connect
; the login screen for the gateway's Embedded HTTP/S-based Web
server is displayed.