AudioCodes 420HD, Administrator'S Manual

Page: 110 / 146

400HD Series IP Phone with Microsoft Lync
Administrator's Manual 110 Document #: LTRT-09936
5.3 Enabling Remote Management
5.3.1 Enabling Telnet Access
Telnet access can be enabled using the Web interface or the Configuration File.
Note: Opening a Telnet connection in an external network is strongly inadvisable due
to the widely recognized vulnerability of the protocol.
¾
To enable Telnet using the Web interface:
1. Open the Telnet page (Management tab > Remote Management menu >
Telnet).
Figure 5-3: Web Interface - Telnet
2. Enable Telnet according to the parameter in the table below, and then click
Submit.
¾
To configure Telnet using the Configuration File:
1. Open the Configuration File page (Management tab > Manual Update >
Configuration File).
2. Configure the parameter using the table below as reference.
Table 5-3: Telnet Parameters
Parameter Description
Note: To add a value to these parameters, enter management/ followed by the parameter name,
equal sign and then the value (e.g.
management/telnet/enabled
=0).
Activate
[management/telnet/enabled]
Enables telnet access to the phone.
ƒ
[0] Disable (default)
ƒ [1] Enable
The user name and password for telnet access are according to
the parameters: system/user_name and system/password.
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-audiocodes-420hd