AudioCodes 320HD, Administrator'S Manual

Page: 96 / 116

320HD IP Phone
Administrator's Manual 96 Document #: LTRT-08108
4.2.8 Packet Recording (Debugging) Parameters
Table 4-33: Packet recording Configuration File Parameters
Parameter Description
voip/packet_recording/e
nabled Activates the packet recording mechanism.
ƒ
[0] Disable (default)
ƒ
[1] Enable
voip/packet_recording/re
mote_ip The IP address (in dotted-decimal notation) of the remote computer to which
the recorded packets are sent. The recorded packets should be captured by a
network sniffer (such as Wireshark).
The default value is 0.0.0.0.
voip/packet_recording/re
mote_port Defines the UDP port of the remote computer to which the recorded packets
are sent.
The valid range is 1024 to 65535. The default value is 50000.
voip/packet_recording/rt
p_recording/enabled Activates the DSP RTP recording.
ƒ
[0] Disable (default)
ƒ [1] Enable
voip/packet_recording/e
c_debug_recording/enab
led
Activates the Echo Canceller Debug recording.
ƒ
[0] Disable (default)
ƒ [1] Enable
voip/packet_recording/n
etwork_recording/enable
d Activates the DSP network (TDM Out) recording.
ƒ
[0] Disable (default)
ƒ
[1] Enable
voip/packet_recording/td
m_recording/enabled Activates the DSP TDM (TDM In) recording.
ƒ
[0] Disable (default)
ƒ
[1] Enable