AudioCodes 320HD, Administrator'S Manual

Page: 73 / 116

Administrator's Manual 4. Configuration File-based Management
Version 1.4.1 73 February 2011
4.2.5 Telnet Parameters
Table 4-9: Telnet Configuration File Parameters
Parameter Description
Note: To add a value to these parameters, enter management/ followed by the parameter name, equal sign
and then the value (e.g.
management/telnet/enabled
=0).
management/telnet/enab
led Enables telnet access to the phone.
ƒ
[0] Disable (default)
ƒ
[1] Enable
The user name and password for telnet access are according to the
parameters:
system/user_name and system/password .
4.2.6 VoIP Parameters
4.2.6.1 Line Parameters
Table 4-10: Line Configuration File Parameters
Parameter Description
Note: The value %d refers to the line number.
voip/line/%d/enabled
Enables the line.
ƒ
[0] Disable
ƒ
[1] Enable
The default for Line-0 is 1 (enabled); for the other lines it is 0 (disabled).
voip/line/%d/id Lines VoIP user’s ID for identification to initiate and accept calls.
The user’s ID can be up to 30 characters.
voip/line/%d/description Arbitrary name to intuitively identify the line and that is displayed to remote
parties as your caller ID.
voip/line/%d/auth_name User name provided to you from the VoIP service provider. This is used
when sending a response to Unauthorized or Proxy Authentication
Requested (401/407).
The authentication name can be up to 35 characters.
voip/line/%d/auth_passwo
rd Password provided to you from the VoIP Service Provider. This is used
when sending a response to Unauthorized or Proxy Authentication
Requested (401/407).
The authentication password can be up to 35 characters.
voip/line/%d/do_not_distu
rb/activated Activates the Do Not Disturb (DnD) feature, if enabled, using the parameter
voip/services/do_not_disturb/enabled .
ƒ
[0] (default) - Activate
ƒ
[1] - Deactivate
Note: DnD can also be activated using the LCD screen interface.