AudioCodes 320HD, Administrator'S Manual

Page: 62 / 116

320HD IP Phone
Administrator's Manual 62 Document #: LTRT-08108
4.2.1.3 System Logging (Syslog) Parameters
Table 4-3: Syslog Configuration File Parameters
Parameter Description
Note: To add a value to these parameters, enter system/ followed by the parameter name, equal sign and
then the value (e.g. system/syslog/mode=UDP).
system/watchdog/enable
d Enables the system watch dog.
ƒ [0] Disable
ƒ
[1] Enable (default)
Note: It is recommended to leave this parameter at its default value.
system/syslog/log_watc
hdog_events Enables the watchdog logs to be sent to the address specified in
system/syslog/server_address.
ƒ
[0] (default) - Disable
ƒ
[1] - Enable
system/syslog/sip_log_fi
lter Filters the type of the VoIP application logging.
ƒ
[0] (default) = Logging is disabled
ƒ
[1] - SIP Call Control
ƒ
[2] - SIP Stack
ƒ [3] - SIP Call Control and SIP Stack
ƒ
[4] - User Application
ƒ
[5] - SIP Call Control and User Application
ƒ
[6] - SIP Stack and User Application
ƒ [7] - SIP Call Control, SIP Stack and User Application
system/syslog/server_ad
dress
The IP address (in dotted-decimal notation) of the computer you are using to
run the Syslog server (e.g. WireShark). The Syslog server is an application
designed to collect the logs and error messages generated by the phone. The
default IP address is 0.0.0.0.
system/syslog/server_p
ort Defines the UDP port of the Syslog server.
The valid range is 0 to 65,535. The default port is 514.
system/syslog/mode
Defines the output direction of the Syslog information.
ƒ
[NONE] (default) - Disable
ƒ
[UDP] - Toward the network