Administrator's Manual
5. Application Server-Specific Configurations
Version 1.4.1
101
February 2011
5.2
Configuring BLF for Asterisk, Coral and Metaswitch
The configuration of the BLF feature is unique when the selected application server is Asterisk,
Coral, or Metaswitch.
¾
To configure BLF for Asterisk application server:
1.
Access the Services page (
Configuration
tab >
Voice Over IP
menu >
Services
). The
figure’s callouts below correspond to the steps in this procedure:
Figure
5-2: BLF Configuration for Special Application Server (Example, Asterisk)
2.
From the ‘Type’ drop-down list, select "Asterisk", "Coral" or "Metaswitch".
3.
In the
BFL Support
group, configure the following:
a.
From the ‘Activate’ drop-down list (
voip/services/busy_lamp_field/enabled
parameter),
select "Enable".
b.
(Optional) In the ‘BLF Subscription Period’ field
(
voip/services/busy_lamp_field/subscription_period
parameter), enter the interval
between BLF and SIP SUBSCRIBE messages.
Note:
The application server’s address is the same as the SIP Registrar address
defined by the parameter
voip/signalling/sip/sip_registrar/addr
(refer to Section
).
4.
Click
Submit
.
5.
Define speed dial keys with the BLF feature (refer to Section
).
Summary of Contents for 320HD
