The DX2040 Summary Screen.
This is a read-only screen which is only displayed while the
OK
button is being pressed when
the RK6 rack is operating in normal mode.
The screen shows the following information: -
The status of the mast-head amplifiers.
For each of the receiver slots: -
The currently selected frequency.
The currently selected AF attenuator setting.
The serial number.
If a slot is not occupied or the DX2040 is switched off, the message '
Not installed
' is shown.
If the RK6 was unable to communicate with an installed DX2040, the message
'
No response to IrDA!
' is displayed.
The mast-head current monitor is always active if the amplifier supply is turned on, so any
change in status occurring while viewing this screen will immediately be displayed.
Mast-Head Amplifiers: A = ON, B = ON.
DX1 838.150MHz. -06dB. Serial No.123456-01
DX2 838.600MHz. -03dB. Serial No.123456-05
DX3 839.700MHz. -03dB. Serial No.123456-06
DX4 840.000MHz. -05dB. Serial No.123456-04
DX5 842.400MHz. -03dB. Serial No.123456-02
DX6 843.200MHz. -04dB. Serial No.123456-03