MX
iR
Receiver
88
45
The Switch
iR
will display the
receiver frequency; for example:
FREQUENCY
Rx
MHz
854.900
To change the MX
iR
frequency:
• Press
OK
again.
The display will alternately flash between frequency and
channel number.
For example:
CHANNEL
01
• Press
a
or
v
to scroll through the 32 frequencies
read from the receiver until the required channel or
frequency is displayed.
For example:
CHANNEL
32
• Align the front of the Switch
iR
with the infra-red port
on the receiver and press
OK
.
If the command was received correctly the display will
show the new frequency.
For example:
FREQUENCY
Tx
MHz
857.950
Otherwise the display will show:
Error
• Repeat the above steps if an error message is
displayed, moving the Switch
iR
closer to the infra-red
port.
§ 6 MXir
12/10/01, 3:19 pm
45