Audio Envoy, User Manual, Page: 32 / 70

HX iR Hand-Held
Transmitter
88
32
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting up the HX iR
To set up the HX iR :
• Fit the battery.
• Switch on by pressing and holding the grey On button
below the infra-red port for one second.
• Check or select the operating frequency.
• Check or set the gain.
• Check or set the low frequency cut filter.
• Check the battery status.
These steps are explained below:
Fitting the battery
Open the battery compartment by gripping the cover
and sliding it gently away from the body of the HX iR . Fit
the battery with the positive terminal uppermost and
close the battery cover until it clicks shut.
Do not twist or turn the battery cover.
Removing the battery
The battery can easily be removed by pushing a small
coin into the slot in the compartment beneath the
battery.
§ 5 HXir 12/10/01, 3:18 pm 32