- 3 -
A10-RACK User Guide
Overview
The A10-RACK is a 4 slot, 8 channel, 1RU wireless microphone receiver enclosure, compatible
with most Unislot and SuperSlot
™
receivers. The A10-RACK accepts up to 4 dual-channel slot-in
receivers, providing a total of 8 separate audio feeds. The A10-RACK provides high-quality an-
tenna distribution, power distribution, up to 8 channels of analogue and/or AES digital audio via
XLR-M connectors and an 8 channel Dante audio interface.
ª
Slot-in receivers are sold separately.
Key Features
• Dante audio network integration for up to four Superslot compatible wireless mic receivers
(eight audio channels), such as Audio Limited’s A10-RX, as well as some models by
Wisycom and Lectrosonics.
• Antenna distribution with 12V power for active antennas and pass-through for a second A10-
RACK (for a total of 16 audio channels)
• Powering distribution via 4-pin XLR-M socket, 10-18VDC
• Analogue or AES outputs via eight XLR-M sockets on rear panel
• Each receiver can be set to output analogue or AES individually (if supported by receiver)
• Simultaneous analogue / AES and Dante outputs
• Secondary Ethernet port for Dante redundancy or daisy-chaining second A10-RACK
•
USB-B port for updating RX firmware via Mic2Wav app
•
470-694MHz front-end RF filter bandwidth
• 1RU chassis size with adjustable rack ears to set required depth
Compatible Receivers
The A10-RACK fits slot-in receivers with maximum dimensions of:
•
Slot height: 18mm (0.71 inches)
•
Slot width: 68.3mm (2.69 inches)
•
Width between SMAs: 84.4mm (3.32 inches)
