- 4 -
A10-RACK User Guide
Panels: Connectors, Controls and More
1
Figure 1: Full Front Panel of A10-RACK
2
1
3
Figure 2: Closeup of Leftmost Slot on Front Panel of A10-RACK
1 -Four Receiver Slots
Each slot accepts one (single- or dual-
channel) 25-pin SuperSlot or unislot receiver.
The connection provides power to the
receiver and connects the receiver’s audio
output directly to the appropriate rear panel
XLR connector and to the Dante interface.
2 -Antenna Distribution Leads
SMA cables (included) are used to
connect receivers to the A10-Rack antenna
distribution system.
3 -Rack Ears
(One of two pictured) Used for mounting
A10-Rack chassis to a 19-inch rack.