14
cei007 Charging/Encryption Interface Controls
The cei007 Charging/Encryption Interface operates via the safety-approved IEC power cord
supplied for connection to 110/120V AC 50/60Hz power. You must change to an approved
power cord for operation in non-U.S. locations (in which case, the cei007 will operate properly
from 100/240V AC 50/60Hz for worldwide use).
Included universal auto-ranging switching power supply assures voltage compatibility world-
wide, 100/240V AC 50/60 Hz.
A switch on the back of the cei007 Charging/Encryption Interface turns the unit on and off.
See the
SpectraPulse
™
sep128 Encryption Manual
.
All 7 bays in the cei007 function as recharging stations.
When the red LED is illuminated, the batteries are being recharged.
When the green LED is illuminated, the batteries are fully charged.
The upper-most bay in the cei007 unit is the encryption station for use with the optional System
Encryption Software – available separately. (This bay also functions as a recharging station.) See
the
SpectraPulse
™
sep128 Encryption Manual
for instructions on how to use the encryption station.
SANYO rechargeable 2700 mAH NiMH AA batteries (preferred for best battery-life performance)
are included with the cei007 Charging/Encryption Interface.
Note: Other models of NiMH
batteries may work, but the cei007 and the mtu101 are optimized for use with SANYO 2700
mAH NiMH AA batteries. WARNING:
Do not use the cei007 Charging/Encryption Interface to
charge batteries of other types besides NiMH or damage may result.
Power Cord
Power Source
On/Off Switch
RS232 Connector for Encryption
Recharging Stations
Charging LED (Red)
Full-Charge LED (Green)
Encryption Station
Batteries
1
2
3
4
5
6
7
8
1
3
4
5
8
2
7
6
