background image

3

Contents

SpectraPulse System Features

3

SpectraPulse UWB Wireless Microphone System Components

4

SpectraPulse System Installation & Operation

5

drm141 Digital Receiver Module  

5

aci707 Audio Control Interface 

5

mtu101 Boundary Microphone Transmitter Unit  

6

cei007 Charging/Encryption Interface

7

drm141 Digital Receiver Module Controls and Functions

8

aci707 Audio Control Interface Front Panel Controls and Functions

10

aci707 Audio Control Interface Rear Panel Controls and Functions

11

mtu101 Boundary Microphone Transmitter Controls and Functions

13

cei007 Charging/Encryption Interface Controls

14

Specifications

15

System Features

• Ultra Wideband (UWB) wireless operation

Delivers clear, intelligible audio without the performance and 
set-up issues associated with conventional RF wireless 
microphone systems.

• Easy to set up and operate

Designed for quick, intuitive setup and user-friendly operation.

• Interference-free performance

Very few RF devices are approved to operate in the frequencies 
where the SpectraPulse

UWB wireless microphone system operates. 

• No problems in crowded RF environments

Bypasses the increasingly congested UHF, VHF and 2.4GHz 
frequency bands; ideal for use in areas with high RF congestion. 

• No frequency hunting or coordination

14 simultaneous channels operate with no frequency coordination
required. Channel selection is quick and easy.

• Immunity to multipath interference

Offers extremely reliable performance; no dropouts or sputters.

• Inherent security

UWB data is transmitted in extremely short-duration pulses sent 
in a timed sequence over a wide frequency spectrum. To decode 
the pulses, the Digital Receiver Module must know exactly 
when, where and how to listen. This makes SpectraPulse

inherently secure.

• Encryption available

Optional encryption package meets NIST-approved AES 128-bit 
encryption standard developed by the U.S. government for 
securing sensitive material.

• Excellent audio quality

Digital signal requires no compression; imperceptible latency; 
microphone muting is silent.

• Universal interface

Connects with teleconference systems, videoconference 
systems, PA/local sound systems, archive recording and 
logging systems.

• Contact closure input/output 

(on Audio Control Interface)

Provides control interface with external devices.

• Flexible performance

Soft-touch button on boundary microphone/transmitter is 
configurable for push-to-talk, push-to-mute, and toggle operation.   

• Minimal Rack Space Required

7 channels in 1 rack space, 14 channels in 2 rack spaces.

• Optional rechargeable batteries and charging/encryption 

station

Extended mAH rechargeable AA NiMH batteries (preferred for 
best battery life performance) are included with optional 
cei007Charging /Encryption Interface.

 

Summary of Contents for SpectraPulse aci707

















Reviews: