Audio Technica ATND1061DAN, User Manual

Page: 62 / 88

Web Remote
61
Auto Mix CH
Item Description
AEC
Set whether to enable the acoustic echo canceler.
Setting to “ON” (blue) will enable this function.
AEC Reference
Set the reference signal. Normally, audio from a microphone at another
site would be selected.
NC
Set whether to enable noise cancellation.
Setting to “ON” (blue) will enable this function.
AGC
Set whether to enable auto gain control.
Setting to “ON” (blue) will enable this function.
Level Set the level of audio output.
Analog Output
Item Description
Unity Set the unity level.
Level Set the level of audio output.
Dante Tx#6 Signal
Item Description
Dante Tx#6 Signal
The assignment of the 6th digital output can be changed. If set to “CH6”,
mixing will take place using equipment at a later stage. If set to “Automix”,
the mixing function of the microphone will be used.
Presets
Presets
Item Description
Preset Name Display the preset name.
Boot Up Preset Set the presets to be recalled when the microphone boots.