Web Remote
57
Dante & Audio Port Settings
Item
Description
IP Config Mode
Set the configuration mode for the IP address.
When “Auto” is selected, IP addresses are automatically assigned by
DHCP servers, etc.
When “Static” is selected, static IP addresses are used.
IP Address
[1]
Set the IP address.
Subnet Mask
[1]
Set the subnet mask.
Gateway Address
[1]
Set the gateway address.
[1] This is possible when “IP Config Mode” is set to “Static”.
IP Control & Web Remote Port Settings
Item
Description
IP Config Mode
Set the configuration mode for the IP address.
When “Auto” is selected, IP addresses are automatically assigned by
DHCP servers, etc.
When “Static” is selected, static IP addresses are used.
IP Address
[1]
Set the IP address.
Subnet Mask
[1]
Set the subnet mask.
Gateway Address
[1]
Set the gateway address.
[1] This is possible when “IP Config Mode” is set to “Static”.
Allow Discovery
Item
Description
Enabled
Set automatic detection for microphones on the same network.
Automatic detection is possible when set to “ON” (blue).
Summary of Contents for ATND1061DAN
