Audio Technica ATND1061DAN, User Manual

Page: 20 / 88

Installation
19
2 Flush mount adapter
3 Flush mount cover
4 Screw (M4 × 10 mm) × 12
5 Hole cover
6 Nut × 4
7 Snap bushing × 2
8 Tile bridge A × 2
9 Tile bridge B × 2
10 Tile bridge C × 4
11 Seismic cable
12 Safety belt
13 Installation template
1
Cut out a square hole in the ceiling for attaching the microphone.
Use the enclosed installation template to cut out a mounting hole according to the specified dimensions.
Installation may not be possible in some areas depending on the placement of the ceiling frame. Check the
internal structure of the ceiling before choosing an installation location.
Max. ceiling thickness for installation: 25 mm
290 mm
290 mm
2
Attach tile bridges A and tile bridges B to the inside of the ceiling using the screws (M4 × 10 mm).
Adjust tile bridges C to the height of the ceiling frame and attach using the screws (M4 × 10 mm).
Attach tile bridges A and B to the ceiling by aligning with the square hole cut into the ceiling.
Securely attach tile bridges A, B, and C to the ceiling frame so that a sufficient load can be supported.
If the placement of the ceiling frame makes it difficult to ensure a secure installation, use nuts and bolts to
attach tile bridges A securely to the ceiling frame mounting holes.
Applicable bolt size for mounting holes of tile bridges A: W3/8 or M10