凸
凹
Technical data
Headphones
Type : Dynamic
Drive Unit : 14.3 mm
Sensitivity : 100 dB/mW
Frequency Response : 15~22,000 Hz
Maximum Input : 40 mW
Impedance : 32 Ω
Mic
Type : Condenser
Polar Pattern : Omnidirectional
Sensitivity : -44 dB (0 dB=1 V/Pa, 1 kHz)
Frequency Response : 100 to 10,000 Hz
Weight : approx. 12 g
（
without cord
）
Cord Length : 1.2 m (Y type*)
＊
Left and right cord lengths are the same.
Plug : 3.5 mm gold-plated stereo mini plug
（
4 pole / L-shaped
）
Accessories : Eartips (S, M) , Case
Sold separately : Eartips
(The contents may be changed without notice for improvements, etc.)
Cleaning
Eartips
l
Main unit
l
Cord
l
Plug
Clean each of the headphones and accessories for lasting long-term
use. Avoid using solvents such as alcohol or thinner for cleaning.
Wipe the cord with a dry cloth after use if there is sweat or dirt.
Continuous use of an uncleaned cord will cause the cord to deteriorate
and harden, resulting in headphone malfunction.
Wipe the plug with a dry cloth if dirty. Using a dirty plug can cause
sound skipping or distortion.
Wipe the main unit with a dry cloth. Foreign matter can accumulate
within the earpiece attachment. Continued use while dirty can cause
the earpiece to detach easily. Wipe the dirt away periodically. Avoid
touching the sensitive port that emits sound; doing so can cause
breakage or malfunction.
M sizes
S sizes
＊
This eartip has no L & R
direction. All eartips can
be used for L & R.
＊
Please check the
direction of the
eartip & housing
■
Size of eartips
■
Replacing eartips
Remove the eartips from the headphones,
and wash them by hand with a mild
cleanser mixed with water. Allow the
eartips to dry thoroughly before reattaching
to the headphones.
Silicon eartips with 2 sizes (S, M) are
included in this product. The S-size
eartips is included in the product package
at time of purchase. To enjoy better
sound quality you may wish to change
the size of the eartips or adjust the
position of the eartips for better fit. If the
eartips is not properly attached in your
ear then low volume sounds may not be
heard clearly.
Remove the old eartips, and mount the
new eartips firmly by fitting concavo-
convex part.
＊
Eartips may fall off if you twist them
too much after mounting.
＊
Keep the headphones with eartips-
attached condition when you store it.
■
Cleaning
